WATTYL EPINAMEL PR250 EPOXY PRIMER OFF WHITE

A universal two pack adhesion promoting, polyamide cured epoxy primer.

Approved to APAS–2971
Conforms to AS/NZS 3750.13 Type 2 and 3

General purpose epoxy primer in protective coating systems for steel and non–ferrous metals.
Excellent adhesion to steel, galvanized steel, non–ferrous metals and fibreglass.
Excellent flow and wetting properties.
Excellent water and corrosion resistancecures at temperatures down to +5°C.
Suitable for touching up of weld seams and damages of epoxy coatings during construction.
Long recoating intervals are possible when overcoating with epoxy and polyurethane coatings.
Can be overcoated with most alkyd, chlorinated rubber, epoxy, two component polyurethane and catalysed acrylic coatings.
Suitable on wet blast cleaned substrates (damp or dry).
Suitable primer for immersion systems (in fresh and salt water) when applied over suitably prepared surfaces.
Suitable with well designed cathodic protection systems.